Senors

Standard Universal Speedometer Sensor

Japanese Gearbox Sensor

Universal Wheel Sensor GM Ford sensor

Universal Wheel Type Sensor

GM/Vauxhall/Fiat/Ford Gearbox Sensor

Universal Wheel Type Sensor

Universal wheel type sensors which normally sense the bolts holding the brake disc to a rotating hub. With a little effort this type of sensor could be used to detect rotating drive shafts or drum type brakes etc with targets attached. The sensor will detect any metallic target and is unaffected by dirt and mud.

The external thread size is M14x1.0

Sensors  manual page
 
Universal Speedometer Sensor Standard universal speedometer cable type for mechanically driven speedometers. Sensors  manual page
 
Japanese Gearbox Sensor

Japanese gearbox sensor which fits directly between the gearbox and speedometer cable of most Japanese cars.

The external thread size is M20x1.5, lug drive pin.

Sensors  manual page
 
GM/Vauxhall/Fiat/Ford/Skoda/Lada Gearbox Sensor

Gearbox sensor which fits most of the gearboxes for the above models.

The externl thread sie is M18x1.5, square drive.

Sensors  manual page
 
Dividing Prescaler Interface This interface will drive the Brantz tripmeter from digital pulse supplies generated by most electronic speedometers and tachographs, plus some ABS sensors. Digital signal required is low (= less than 1 volt) high (= more than 4 volts). High rate pulse supplies are divided by up to 16. Sensors  manual page



Sensors | Accessories | Manuals | Rally Tripmeters | Road Eng Tripmeters | Contact Us

Top of page