The
Brantz Architect 2 shares many of the features of the basic
Architect, but combines the same high accuracy with an additional
four digit display for intermediate distances. This second
display can be RESET and FROZEN independently, allowing
measurements unconnected with the total distance.
The
four digit Light Emitting Display features top quality 0.6
inch digits and an accuracy of better than 99.6%. High quality
on/off and other controls, along with solid-state electronics
ensure reliability in service.
The
meter has the facility of zeroing the measured readings,
counting backwards, and by holding the zeroing button pressed
whilst powering up the instrument, the decimal point of
the readout will shift one place to the right to show 99.99
km or miles instead of the usual 9.999. Distances do of
course roll over when the readout reaches 9999.
|